Related Products
Flowbench System – AEROTECH
AEROTECH Flowbench DAQ Controller integrating airflow (CFM) measurement against actual valve lift, with pressure, flow percentage, dial position, velocity, and turbulence parameters for airflow characteristic testing.
PD-1 Controller
A Data Acquisition (DAQ) controller for Power Dyno, integrating real-time Roller RPM, Engine RPM, and AFR measurements.
Smart Solar Dryer Based on IoT
A solar-powered coffee bean dryer with an IoT-based automatic control system for monitoring and controlling temperature, humidity, and fan operation through a smartphone.
IoT-Based Livestock Weighing System
An IoT-based livestock weighing system for real-time animal weight measurement, RFID identification, and connected livestock data monitoring.
AFR Wideband LSU4.9
AFR acquisition module for Bosch LSU4.9 wideband sensors in PowerDyno systems, with real-time AFR signal processing.
Engine RPM Sensor
A sensor for measuring engine RPM and transmitting the data to the PD-1 Controller as part of the vehicle performance testing data acquisition system.
Speed Sensor
A Hall Effect sensor for measuring dyno roller speed and transmitting Roller RPM data to the PD-1 Controller in real time.
RPM Clamp Capacitive
A capacitive clamp for capturing ignition signals as an input for Engine RPM measurement in PowerDyno systems.
RPM Clamp Inductive
An inductive clamp with a pickup coil for capturing electromagnetic pulses from the ignition cable as an input for Engine RPM measurement.
Thermocouple Cable Probe
A temperature sensor probe for the PD-1 Controller, used to measure engine temperature during testing.