Flowbench System – AEROTECH
AEROTECH Flowbench DAQ Controller integrating airflow (CFM) measurement against actual valve lift, with pressure, flow percentage, dial position, velocity, and turbulence parameters for airflow characteristic testing.
Related Products
PowerDyno Performance Testing System
A vehicle performance testing system integrating a dyno roller, data acquisition hardware, and software for real-time measurement and data analysis.
PD-1 Controller
A Data Acquisition (DAQ) controller for Power Dyno, integrating real-time Roller RPM, Engine RPM, and AFR measurements.
Smart Solar Dryer Based on IoT
A solar-powered coffee bean dryer with an IoT-based automatic control system for monitoring and controlling temperature, humidity, and fan operation through a smartphone.
IoT-Based Livestock Weighing System
An IoT-based livestock weighing system for real-time animal weight measurement, RFID identification, and connected livestock data monitoring.
AFR Wideband LSU4.9
AFR acquisition module for Bosch LSU4.9 wideband sensors in PowerDyno systems, with real-time AFR signal processing.
Engine RPM Sensor
A sensor for measuring engine RPM and transmitting the data to the PD-1 Controller as part of the vehicle performance testing data acquisition system.
Speed Sensor
A Hall Effect sensor for measuring dyno roller speed and transmitting Roller RPM data to the PD-1 Controller in real time.
RPM Clamp Capacitive
A capacitive clamp for capturing ignition signals as an input for Engine RPM measurement in PowerDyno systems.
RPM Clamp Inductive
An inductive clamp with a pickup coil for capturing electromagnetic pulses from the ignition cable as an input for Engine RPM measurement.
Thermocouple Cable Probe
A temperature sensor probe for the PD-1 Controller, used to measure engine temperature during testing.